Windows attempts to find the driver located on the USB drive.
10. Select the Micron Device driver when prompted for a driver, and then click Next.
11. Remove the USB drive from the system.
The Where do you want to install Windows dialog appears again. The drive should
appear as a new drive number.
Note: The drive may be labeled with "unallocated space" and contain a capacity
close to the user capacity rated for the drive. (For example, a 350GB drive may ap-
pear as 326GB.)
If you receive a setup error at this point, you may need to do the following:
a. Cancel the installation.
b. With the installation DVD and USB drive in the system, reboot the system to
the version of Windows already installed on the bootable primary drive. You
may need to change the BIOS setting to point to the original drive.
c. Use Windows Explorer to find the Windows installation DVD, expand the root
directory, and run the setup.exe file located on the installation DVD.
d. Follow steps 6–13.
e. Exit Windows and power down the system.
f. Power up the system.
g. If necessary, change the BIOS primary boot drive setting to point to the
P420m/P320h drive, and then reboot the system.
h. Verify that Windows boots from the P420m/P320h drive.
12. Select the drive and click Next.
The Windows installation continues and may take several minutes to complete.
During this time, the system reboots automatically several times. Do not attempt
to reboot from the CD/DVD.
13. After the installation completes, remove the Windows CD/DVD and reboot the
system.
14. Verify the system boots from the OS installed on the drive.
Windows Server 2008 and Windows 7
Before you begin, it is recommended to remove all storage devices from the system ex-
cept for the P420m/P320h drive or the original OS boot drive.
1. Download and unzip the support pack software.
2. Go to Windows Driver/os_install_drivers and navigate to the subdirectory for
your operating system:
• Windows Server 2008 R2 x64: /x64/win7-server2008r2
• Windows 7 x64: /x64/win7-server2008r2
• Windows 7 x32: /x86/win7
3. Copy the contents of the subdirectory for your operating system to external re-
movable media, such as a USB drive. (For example, for Windows Server 2008 R2
x64, copy the contents of the /x64/win7-server2008r2 subdirectory.
4. Insert the Windows operating system CD/DVD and the USB drive containing the
support pack files into the system and reboot.
5. When prompted, select the option to boot from a CD/DVD.
6. Select your operating system.
7. Select Core (command line) or GUI to begin the installation. (GUI is recommen-
ded for most users.)
P420m/P320h PCIe SSD Boot Drive Installation Guide
Windows Server 2008 and Windows 7
PDF: 09005aef85997a0b
P420m_P320h_boot_drive_installation_guide.pdf - Rev. A 3/14 EN
3
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale